DT466

Navistar EGR Cooler Kit - FEG1733 Remanufactured EGR Cooler Original Unit measures 13.5 inches from flange weld to flange weld (body measurement) Stainless Steel Tubing Includes Gasket and Installation Kit Direct Fit, No Modification Required ...

Navistar EGR Cooler Kit - EGR733 New EGR Cooling Solutions Manufactured by Bostech Original Unit measures 13.5 inches from flange weld to flange weld (body measurement) Upgraded Design by Bostech, Round Cooler replaces Rectangle Cooler Tig Welded...

Navistar EGR Cooler - EGR540 New EGR Cooling Solutions Manufactured by Bostech Original Unit measures 17 inches from flange weld to flange weld (body measurement) Upgraded Design by Bostech, Round Cooler replaces Rectangle Cooler Complete with Coolant...

Ford ICP/EBP Connector Pigtail - WH02614 Wire connector by BT-Power Replaces Bostech # ISK614 Direct Fit Technical Info: 3 wire connector 20 gauge wire 11 inch wire length Rubber connector seal Fits the following: Ford/International ICP Sensor ...

Exhaust Back Pressure (EBP) Sensor - BTS021308 The exhaust back pressure sensor reads the vehicles exhaust pressure, helping the PCM to control the amount of turbo boost.  Direct Replacement - Ready to Install Made in the USA 13 Month...

Exhaust Back Pressure (EBP) Sensor - FDS-3510 New Sensor by ForDiesels Direct Replacement - Ready to Install Ford 6.4L Engine Application: F-250 Super Duty 2008-2010 F-350 Super Duty 2008-2010 F-450 Super Duty 2008-2010 F-550 Super Duty...

International DT466 EGR Valve - 904-5062 New EGR Valve by Dorman Products Manufactured to OE Specifications Gaskets Included Direct Replacement for Proper Fit International 7.6L Navistar DT466 Engine Applications: IC Corporation 1300 FBC 2006...

International DT466 EGR Valve - 904-5056 New EGR Valve by Dorman Products Manufactured to OE Specifications Gaskets Included Direct Replacement for a Proper Fit International 7.6L Navistar DT466 Engine Applications: IC Corporation 1300 FBC...

Navistar EGR Cooler Kit - EGR590 New EGR Cooling Solutions Manufactured by Bostech Original Unit measures 11.5 inches from flange weld to flange weld (body measurement) Upgraded Design by Bostech, Round Cooler replaces Rectangle Cooler Tig Welded...

Navistar EGR Cooler Kit - EGR542 New EGR Cooling Solutions Manufactured by Bostech Original Unit measures 21 inches from flange weld to flange weld (body measurement) Upgraded Design by Bostech, Round Cooler replaces Rectangle Cooler Tig Welded...

Navistar EGR Cooler Kit - EGR590 Remanufactured EGR Cooler with Stainless Steel Tubing Unit measures 11.5 inches from flange weld to flange weld (body measurement) Includes Gasket and Installation Kit Direct Fit, No Modification Required Proudly...

International EGR Cooler - EGR06170 Remanufactured EGR Cooler with Stainless Steel Tubing Unit measures 17 inches from flange weld to flange weld (body measurement) Includes Gasket and Installation Kit Direct Fit, No Modification Required Proudly...

International EGR Cooler Kit - EGR06210 Remanufactured EGR Cooler with Stainless Steel Tubing Original Unit measures 21 inches from flange weld to flange weld (body measurement) Includes Gasket and Installation Kit Direct Fit, No Modification...